Digitex 8/33
Frequency/Mode 8 kHz or 33 kHz, constant dual frequency
available in connection mode
Tracing Range Induction typically 500 ft/150 m, connection
typically 820 ft/250 m
Protection Conforms to IP67 (with the lid shut)
Included Accessories Crocodile equipped connection cable set
with earth spike
Batteries 4 x C alkaline (IEC LR14) (supplied)
Battery Life 40 hours continuous use
Weight 6.5 lbs/2.95 kg including standard accessories and
batteries
How to apply a tracing signal:
*
Direct Connection
Connecting the DIGITEX 8/33 to a valve, junction box, domestic power distribution network, or other access point of the conductor is the most effective methodology and is preferable to induction whenever possible.
*
Use a Signal Clamp
A Signal Clamp is used to apply the DIGITEX 8/33 signal to a pipe or live electricity cable. Supply is not interrupted by the applied signal and the operator is not exposed to any live services.
*
Induction
The DIGITEX 8/33 induces a tracing signal into the underground pipe or cable. This is a quick and convenient method when direct connection or signal clamping is not possible.
(